Difference between revisions of "WRT54GL Linksys Routers"
From HeadBackup
Jump to navigationJump to search| Line 1: | Line 1: | ||
| + | == Introduction == | ||
Things I have done with a WRT54GL router running ddwrt custom firmware: | Things I have done with a WRT54GL router running ddwrt custom firmware: | ||
| Line 9: | Line 10: | ||
* Multiple wireless networks on the same router with different SSIDs and different vlan tags | * Multiple wireless networks on the same router with different SSIDs and different vlan tags | ||
| + | |||
| + | == Details == | ||
| + | |||
| + | === Adding a third vlan and network === | ||
| + | These steps assume you already have two other vlans configured. | ||
| + | |||
| + | ==== Add ports to the new vlan ==== | ||
| + | <pre> | ||
| + | nvram set vlan4ports="0t 5t" | ||
| + | nvram commit | ||
| + | </pre> | ||
| + | ==== Create a startup script to load firewall rules and configure the interface === | ||
| + | <pre> | ||
| + | echo ' | ||
| + | #!/bin/ash | ||
| + | PATH="/sbin:/usr/sbin:/bin:/usr/bin:${PATH}" | ||
| + | iptables -I FORWARD -i br0 -o vlan4 -j ACCEPT | ||
| + | iptables -I FORWARD -i vlan4 -o br0 -j ACCEPT | ||
| + | iptables -I FORWARD -i vlan4 -o vlan1 -j ACCEPT | ||
| + | iptables -I INPUT -i vlan4 -j ACCEPT | ||
| + | ip addr add 10.7.1.7/24 brd + dev vlan4 | ||
| + | ifconfig vlan4 up | ||
| + | ' > /jffs/etc/config/vlan4.startup | ||
| + | chmod 750 /jffs/etc/config/vlan4.startup | ||
| + | </pre> | ||
Revision as of 18:25, 22 June 2010
Contents
Introduction
Things I have done with a WRT54GL router running ddwrt custom firmware:
- Single router with 2 subnets each with seperate vlan, IP block, DHCP server, and firewall rules.
- VLAN trunking
- QoS traffic prioritization based on IP address
- WPA encrypted wireless point to multipoint bridging
Things I may implement in the future:
- Multiple wireless networks on the same router with different SSIDs and different vlan tags
Details
Adding a third vlan and network
These steps assume you already have two other vlans configured.
Add ports to the new vlan
nvram set vlan4ports="0t 5t" nvram commit
= Create a startup script to load firewall rules and configure the interface
echo '
#!/bin/ash
PATH="/sbin:/usr/sbin:/bin:/usr/bin:${PATH}"
iptables -I FORWARD -i br0 -o vlan4 -j ACCEPT
iptables -I FORWARD -i vlan4 -o br0 -j ACCEPT
iptables -I FORWARD -i vlan4 -o vlan1 -j ACCEPT
iptables -I INPUT -i vlan4 -j ACCEPT
ip addr add 10.7.1.7/24 brd + dev vlan4
ifconfig vlan4 up
' > /jffs/etc/config/vlan4.startup
chmod 750 /jffs/etc/config/vlan4.startup
